
Industry
Elzinga drying oven: 90 kW gas to 21 kW electric
90 kW gasto21 kW electric
An 11 metre drying oven converted from 90 kW gas to 21 kW electric, maintaining 7,000 lids per hour.
View the case studyWe analyse your process and installation. Optimising first delivers an immediate return and avoids oversizing.

Replacing a gas installation like for like with electric often results in an oversized connection and excessive investment. The actual power required is usually much lower.
At Elzinga, 21 kW electric proved sufficient where 90 kW gas had been installed. At Sauna De Bongerd, external advice recommended 40 kW per heater; 16 kW proved sufficient. That difference comes from measurement, not a table.
Grid congestion need not hold you back. We first look at what you can save, then at intelligent control and spreading peak demand, and only then at a larger connection.
A hybrid solution can help as a first step or when grid capacity is limited.
Businesses in Fryslân can have part of their advisory costs reimbursed through the Adviesvoucherregeling Fryslân 2025–2027.
Our approach
We investigate where energy is lost, actual heat demand and when peak loads occur.
You gain insight into optimisation, potential savings and the choice between electric and hybrid.
We ensure correct sizing, integration into your existing system and smart control.
We convert, commission and fine-tune. Scheduling reduces lost production time to virtually zero.
Projects

Industry
90 kW gasto21 kW electric
An 11 metre drying oven converted from 90 kW gas to 21 kW electric, maintaining 7,000 lids per hour.
View the case study
Industry
350 kW gasto85 kW electric
An existing 350 kW gas drying oven converted to hybrid operation, with three electric heating layers totalling 85 kW.
View the case study
Industry
A 66 m³ gas-fired curing oven optimised first as the basis for electrification.
View the case studyImage


Result
Knowledge base
First determine where, when and how much heat is needed before choosing electric power.
Read the articleA table of required SHS electric power at gas system efficiencies of 40% and 60%.
Read the articleFAQ
Arrange an analysis of your heating process.
Would this suit your situation? Let us discuss it.