
Industry
Van Keulen drying oven: 350 kW gas to hybrid with 85 kW electric
350 kW gasto85 kW electric
An existing 350 kW gas drying oven converted to hybrid operation, with three electric heating layers totalling 85 kW.
View the case studyIndustry
Elzinga BV · Jirnsum
An 11 metre drying oven converted from 90 kW gas to 21 kW electric, maintaining 7,000 lids per hour.
Gas, before
90 kW
Electric, after
21 kW

Elzinga dries paint-can lids in an 11 metre drying oven. Gas burners with a total output of 90 kW heated the oven. The process requires a constant temperature of approximately 100 °C and high production capacity.
The drying oven needed to be electrified without reducing production capacity. Elzinga also wanted to improve conditions in the production hall: the gas burners were noisy and the hot chimney created a high heat load.
We retained the existing drying oven and replaced only the gas burners with a 21 kW electric heating system. We based the design on the heat the drying process actually needs, not the existing gas power.
The oven still dries approximately 7,000 lids per hour at about 100 °C, now fully electrically. Installed power has fallen by approximately 75% and the paint finish is scratch-resistant. The gas burners, combustion gases and hot chimney are gone. Burner noise has disappeared, so hearing protection is no longer required at this installation. The innovation has been nominated for the ION Borghardt Award 2026.

Industry
350 kW gasto85 kW electric
An existing 350 kW gas drying oven converted to hybrid operation, with three electric heating layers totalling 85 kW.
View the case study
Industry
An existing coating oven of approximately 45 m³ converted from 250 kW gas to electric process heating.
View the case study
Industry
110 kW gasto32 kW electric
An industrial tumble dryer made fully electric within its existing housing.
View the case studyBook a consultation. We first investigate what your process really needs.
Would this suit your situation? Let us discuss it.