FAQ

Frequently asked questions

Cannot find your question? Call us or book a consultation.

Electrification overview

You replace heat from gas wholly or partly with electric process heating.

Often, yes. It depends on your process, temperature, power and grid capacity.

Savings can reach 50–75%, depending on the application, current energy consumption and chosen technology. But the benefits of electrification go beyond a lower energy bill. Switching from gas to electric or hybrid systems offers:
  • Lower energy costs: More efficient energy use can lead to substantial savings on your operating costs.
  • Lower CO₂ emissions: You reduce direct emissions from your production process and work towards your climate targets. This also helps meet future CO₂ reduction requirements.
  • Complying with laws and regulations: European and Dutch regulations place increasingly strict requirements on energy consumption, CO₂ emissions and industrial systems. Electrification helps you prepare for future obligations and avoid costly adjustments under time pressure later.
  • A better working environment: Electric systems often produce less waste heat and fewer combustion gases. This can create a more pleasant, healthier and safer working environment for your employees.
  • Lower maintenance and operating costs: Depending on the technology, electrical systems may require less maintenance and offer greater process control.
  • Future-ready production: You become less dependent on natural gas, respond to the energy transition and strengthen your position with customers who place increasing demands on sustainability.
Practical examplesAt Elzinga, a 90 kW gas-fired drying oven was replaced by a 21 kW electric system. At Van Keulen, a 350 kW gas-fired drying oven was replaced by a hybrid system with 85 kW of electric power. Van Keulen has since decided to stop using gas-fired heating.The actual payback period and total savings depend on your situation. Energy savings are not the only factor: CO₂ reduction, legal obligations, working conditions, product quality and process speed also affect total operating costs.
View the Elzinga case studyView the Van Keulen case study

There is no standard price. We start with an analysis, then prepare a substantiated proposal.

Hardly at all. We prepare in advance and install during planned stops or short sessions.

Hybrid heating and grid congestion

A system combining gas and electricity that uses the appropriate heat source for each situation.

Yes, electrification is often possible even with grid congestion. Many companies have sufficient spare capacity within their existing contracted power limit for much of the day. Problems usually arise at specific times when several systems demand high power simultaneously. Smart energy management makes better use of available grid capacity. For example:
  • Smart use of available grid capacity: Electric systems can be used when there is spare capacity within the existing contracted power limit.
  • Hybrid solutions: Combining gas and electricity allows the existing gas system to support the electric system during peak demand.
  • Managing peak power demand: Heat buffers, energy storage or smart power control can smooth out temporary peaks.
  • Smart process control: By better coordinating production processes and system start-up times, you prevent total power demand from exceeding available grid capacity.
The challenge is therefore often not total energy consumption, but managing peak demand.SHS Europa investigates the spare capacity within your current grid connection and contracted power limit, and how to adapt electrification accordingly. This often allows your company to become more sustainable and save energy without immediately needing a higher-capacity grid connection.Even with grid congestion, there are often more options than you think.

We first analyse actual power demand. Then we optimise or choose hybrid heating.

No. Energy generation, security of supply and prices also matter.

Industrial buildings

Yes. Infrared provides targeted heating by workstation or zone.

Yes. Radiant heat targets what needs heating instead of all the air beneath the roof.

Yes. The heaters can be used for supplementary or hybrid heating.

That mainly depends on how you use the zones. Hall heating consumption is often not measured separately.

Yes. They are plug-and-play and can be moved when the layout changes.

Wellness

Often, yes. We assess the sauna, heater, connection and required power.

Yes. We match them to the space and steam-session use, including saunas larger than 100 m³.

This depends on volume, insulation, temperature, warm-up time, usage and sauna type.

We consider power distribution, smart control, warm-up times, peak shaving or storage.

Yes. An electric designer sauna heater can become part of the interior.

Yes. Our sauna heaters turn all the water poured over them into steam. Sauna Grimbergen experienced stronger evaporation, a more intense fragrance and needed less water or ice per steam session.

That mainly depends on how much energy the sauna actually needs, not just the price per kWh. We therefore calculate the required power first. Early customers such as Sauna De Bongerd and Thermen La Mer saw substantial energy savings after conversion.View the Sauna De Bongerd case studyView the Thermen La Mer case study

We consider power distribution, smart control, coordinated warm-up times and peak shaving or storage. At Sauna Swoll, a battery manages the peaks.

Yes. We are a dealer for Kusatek gas-fired sauna heaters from 10 to 120 kW, DVGW-certified and ready for later conversion to electric.

Another question about your own system?

Book a consultation. We are happy to help, even if you are still exploring.

Would this suit your situation? Let us discuss it.