
Industry
Elzinga drying oven: 90 kW gas to 21 kW electric
90 kW gasto21 kW electric
An 11 metre drying oven converted from 90 kW gas to 21 kW electric, maintaining 7,000 lids per hour.
View the case studyIndustry
Van Keulen Interieurbouw
An existing 350 kW gas drying oven converted to hybrid operation, with three electric heating layers totalling 85 kW.
Gas, before
350 kW
Electric, after
85 kW

Van Keulen Interieurbouw used an existing industrial drying oven with 350 kW gas-fired heating.
Products passing through the oven differ in length. Heating the full length of the oven produced heat where the product did not need it. The oven needed to become more sustainable without replacing the entire installation.
We converted the oven to a hybrid system that can run on gas, fully electrically or on both. Three independently switched electric heating layers were installed, heating only the part of the oven needed for the product's length. The oven received product sensing, adjustable parameters for each product type and continuous process monitoring.
The electric installation has an output of 85 kW instead of 350 kW gas. Measured energy consumption is approximately 50% of the original gas consumption. The gas function has not been used since commissioning. No new oven was needed.
Image



Industry
90 kW gasto21 kW electric
An 11 metre drying oven converted from 90 kW gas to 21 kW electric, maintaining 7,000 lids per hour.
View the case study
Industry
An existing coating oven of approximately 45 m³ converted from 250 kW gas to electric process heating.
View the case study
Industry
110 kW gasto32 kW electric
An industrial tumble dryer made fully electric within its existing housing.
View the case studyBook a consultation. We first investigate what your process really needs.
Would this suit your situation? Let us discuss it.