Industrial buildings

Elzinga hall heating: lead time from 3 to 2 days

Elzinga BV

Targeted infrared heating in four halls. Just 18 kW electric proves sufficient and production is faster.

Gas, before

100 kW

Electric, after

18 kW

  • 100 kW gas → 18 kW electric required
  • Turnaround time 3 → 2 days
  • 8 SHS IR Halstraler units
  • Zone control via KNX
SHS IR Halstraler on the ceiling of a workshop hall at Elzinga

Situation

Elzinga, a specialist in spraying and painting, heated four industrial halls with gas-fired dark radiant heaters totalling 100 kW.

Problem

Much of the heat remained high in the hall, although it was needed at workplaces and in production. Elzinga also wanted to reduce its environmental footprint.

Solution

We installed 8 SHS IR Halstraler units rated at 3.1 kW each, totalling 24.8 kW. The dark radiant heaters still provide background heat; the hall heaters deliver targeted heat to workplaces. A central KNX system allows each heater to be controlled individually and heating to be adjusted by zone.

Result

In practice, 18 kW electric proves sufficient. Targeted, constant heat makes the filler cure faster: turnaround time fell from approximately three days to two. This increases production capacity and creates a more comfortable working environment.

Image

Photos of this project

SHS IR Halstralers beneath the roof of a hall at ElzingaSHS IR Halstraler above the workshop floor at Elzinga

More case studies

Looking for targeted heating?

Book a consultation about your hall and the zones you use.

Would this suit your situation? Let us discuss it.